...
Pre-installation Consideration
Common Information
MCCS 4.0
...
supporting browsers
MCCS4.0 에서는 웹 브라우저를 통한 웹관리 콘솔을 제공합니다.지원하는 브라우저는 다음과 같습니다.
...
provided the web management console through a web browser. The following types of browsers are supported.
- Internet Explorer 8.0 or higher
- Google Chrome 7 이상or higher
- Fire Fox 4 이상.or higher
Operating System and Software
...
When failure occurred in a group, MCCS will online the service resources on the standby which runs the same resources on the active. Users need to add the service resources mentioned above to manage by MCCS.
Please refer to "7-Resource of MCCS User Guide" for more details about adding a resource by the user .
Before adding a resource, user should decide what kind of service of resource and read the following in advance and these attributes will be set.
- Process ServiceService
- Directory where program of Process is registered
- Program name in a form of single process that executable
- The name of the account that you want to run
- Application Service
- Directory location of script files of the program to register Application
(Please refer to " 7-Resource of MCCS User Guide" for more details.) - The name of the account that you want to run
- Directory location of script files of the program to register Application
- 리눅스 서비스 관리자에 등록된 해당 서비스의 시작 레벨을 'OFF'으로 변경 리눅스 서비스 관리자에 등록된 양 노드의 동일한 서비스명
- Linux service
- Turn 'off' the start level of service registered in the Linux service manager.
- Same service name for the both nodes registered in the Linux service manager.
Checklist for Installation and Configuration
Following is the checklist for installation and configuration for MCCS.
| 구성요소Component | Node1 | Node2 | ||
|---|---|---|---|---|
| Active(Source) | Standby(Target) | |||
| Network Info. | Hostname | |||
| Service Network | NIC Name | |||
| IP Address | ||||
| Subnet Mask | ||||
| Virtual IP Address | ||||
| Heartbeat Network | NIC Name | |||
| IP Address | ||||
| Subnet Mask | ||||
| Heartbeat Network | NIC Name | |||
| IP Address | ||||
| Subnet Mask | ||||
| Disk Info. | Shared Disk Volume | |||
| Mount Point | ||||
| Application Info. | Protection Service | |||
| Protection Process | ||||
| Protection Application | ||||
...
Following is a sample checklist for MCCS installation and configuration..
| 구성요소Component | Node1 | Node2 | ||
| Active (Soruce) | Standby (Target) | ||
Network Info.
| Hostname | tom | jerry | |
Service Network
| NIC Name | eth0 | eth0 | |
IP Address | 210.169.4.2 | 210.169.4.3 | ||
Subnet Mask | 255.255.255.0 | 255.255.255.0 | ||
Virtual IP Address | 210.169.4.1 / 255.255.255.0 |
| ||
Heartbeat Network
| NIC Name | eth1 | eth1 | |
IP Address | 10.10.10.1 | 10.10.10.2 | ||
Subnet Mask | 255.255.255.0 | 255.255.255.0 | ||
Heartbeat Network
| NIC Name | eth2 | eth2 | |
IP Address | 20.20.20.1 | 20.20.20.1 | ||
Subnet Mask | 255.255.255.0 | 255.255.255.0 | ||
Disk Info. | Shared Disk Volume |
| /dev/sdd1 |
|
| Mount Point | /Oracle | |||
Application Info.
| Protection Service |
| vsftpd |
|
| Protection process | Custom Process | |||
Protection application |
| Oracle |
| |