bsr load
...
bsr unload
...
resource up
...
resource down
...
resource connect
...
resource disconnect
...
syncsource
resync start
...
resync finished
...
synctarget
resync start
...
resync finished
...
state change
role, replication, disk, connection
...
cli command
...
| Table of Contents |
|---|
개요
개별 동작에 따라 발생하는 일련의 로그 패턴들에 대해 분석하고 설명합니다.
동작
| Info |
|---|
windwos bsr 1.6.1 버전의 로그를 기준으로 합니다. |
드라이버 기동
다음은 windows 에서 bsr 커널 드라이버가 기동할 때의 로그 입니다.
드라이버 버전과 드라이버에서 사용하는 port 정보등을 출력합니다.
윈도우즈 커널 드라이버는 시스템이 시작하는 시점에 기동합니다. 기동 시점의 로그 시간을 보면 시스템이 시작한 시간을 유추할 수 있습니다.
| Code Block |
|---|
00000001 10/26/2020 16:24:42.7079617 [initRegistry] [DRIVER:63] bsr_info<6> [0xFFFFE0012A6BD880] registry_path[\Registry\Machine\System\CurrentControlSet\Services\bsr]
00000002 10/26/2020 16:24:42.7079678 [initRegistry] [DRIVER:64] bsr_info<6> [0xFFFFE0012A6BD880] bypass_level=0, read_filter=0, use_volume_lock=1, netlink_tcp_port=5678, daemon_tcp_port=5679, ver=1.5
00000003 10/26/2020 16:24:42.7080324 [wait_for_add_device] [LOG:10] bsr_info<6> [0xFFFFE0012A9DC300] Wait for device to be connected for log file generation.(C:\Program Files\bsr)
00000004 10/26/2020 16:24:42.7080346 [bsr_init] [DRIVER:77] bsr_info<6> [0xFFFFE0012A6BD880] BSR driver loaded and initialized successfully. Version: 1.6.1 (api:2/proto:86-114)
00000005 10/26/2020 16:24:42.7080380 [bsr_init] [DRIVER:78] bsr_info<6> [0xFFFFE0012A6BD880] 1.6.1(2020.10.13_A1) GIT-hash: f52eea3 build by DEV3-KBLD+Administrator@dev3-kbld, Tue Oct 13 15:19:41 2020
00000006 10/26/2020 16:24:42.7080400 [bsr_init] [DRIVER:79] bsr_info<6> [0xFFFFE0012A6BD880] registered as block device major 147
00000007 10/26/2020 16:24:42.7080424 [DriverEntry] [DRIVER:4] bsr_info<6> [0xFFFFE0012A6BD880] BSR MVF Driver loaded. |
상태 변경
다음은 bsr 커널의 disk, peer disk, replication, connection, role의 상태가 변경될 때 발생하는 로그 입니다.
복수의 상태 변경이 하나의 로그에 출력 될 수 있습니다.
연결 상태가 connected 에서 connecting 또는 standalone 으로 변경 될 경우, 연결 상태 변경 로그를 중심으로 분석합니다.
로그에는 해당 상태 변경을 수행한 호출자 함수의 이름이 같이 출력됩니다. 함수의 호출 흐름을 추적하여 디버깅 정보로 활용할 수 있습니다.
다음 로그에서 상태 변경을 수행한 호출자는 change_disk_state, recevie_state, change_role, connect_work 가 됩니다.
| Code Block |
|---|
00000053 10/13/2020 16:09:29.3583295 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): change_disk_state, disk( Attaching -> UpToDate )
00000091 10/13/2020 16:09:48.2615732 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100200): receive_state, pdsk( DUnknown -> UpToDate ) repl( Off -> Established )
00000099 10/13/2020 16:10:14.3457504 [print_state_change] [STATE:18] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0xa1c): change_role, role( Secondary -> Primary )
00000583 10/13/2020 16:14:01.5270141 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0xe), scf(0xa0a): connect_work, conn( Connecting -> Connected ) peer( Unknown -> Secondary ) |
Netlink 명령
다음은 bsr 유틸리티로 명령을 수행했을 때의 로그와 설명입니다.
Netlink 를 통한 유틸리티 명령은 커널로그로 기록되며 명령의 시작과 끝은 인식할 수 있도록 아래의 로그와 같이 기록하고 있습니다.
명령의 시작은
command has been received. Execute the command.로 기록됩니다.명령의 끝은
command execution terminated.로 기록됩니다.명령의 시작과 끝을 하나의 쌍으로 보고 하나의 명령단위로 간주하면 됩니다.
다음의 로그 예는 Netlink 명령의 시작과 끝 로그 만을 중점으로 기록한 내용입니다. 시작과 끝 사이에 명령을 수행한 내역의 로그들은 가독성을 위해 생략하였습니다.
| Code Block |
|---|
00000018 10/26/2020 16:25:03.2195574 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_RESOURCE:7 command has been received. Execute the command.
...//명령 수행
00000020 10/26/2020 16:25:03.2197637 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_RESOURCE:7 command execution terminated. (pending command:0)
00000021 10/26/2020 16:25:03.2278267 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_MINOR:5 command has been received. Execute the command.
...//명령 수행
00000023 10/26/2020 16:25:03.2280254 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_MINOR:5 command execution terminated. (pending command:0)
00000024 10/26/2020 16:25:03.2352395 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_PEER:44 command has been received. Execute the command.
...//명령 수행
00000027 10/26/2020 16:25:03.2354514 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_PEER:44 command execution terminated. (pending command:0)
00000028 10/26/2020 16:25:03.2442056 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_PATH:45 command has been received. Execute the command.
...//명령 수행
00000029 10/26/2020 16:25:03.2444816 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_PATH:45 command execution terminated. (pending command:0)
00000030 10/26/2020 16:25:03.2884146 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B2FC880] BSR_ADM_ATTACH:12 command has been received. Execute the command.
...//명령 수행
00000055 10/26/2020 16:25:03.3033626 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B2FC880] BSR_ADM_ATTACH:12 command execution terminated. (pending command:0)
00000056 10/26/2020 16:25:03.3136502 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B2F9880] BSR_ADM_CONNECT:10 command has been received. Execute the command.
...//명령 수행
00000059 10/26/2020 16:25:03.3139110 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B2F9880] BSR_ADM_CONNECT:10 command execution terminated. (pending command:0) |
connect
connect 명령을 수행했을 때의 시작 로그입니다.
| Code Block |
|---|
00000056 10/26/2020 16:25:03.3136502 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B2F9880] BSR_ADM_CONNECT:10 command has been received. Execute the command.
00000057 10/26/2020 16:25:03.3136604 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012B2F9880] Worker should not initiate state changes with CS_SERIALIZE current:FFFFF800A6319BD0 resource->worker.task:FFFFE0012C513C60
00000058 10/26/2020 16:25:03.3136765 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(StandAlone), prole(Unknown), cflag(0x0), scf(0x2a): bsr_adm_connect, conn( StandAlone -> Unconnected )
00000059 10/26/2020 16:25:03.3139110 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B2F9880] BSR_ADM_CONNECT:10 command execution terminated. (pending command:0)
00000060 10/26/2020 16:25:03.3139464 [bsr_thread_start] [THREAD:11] bsr_info<6> bsr r0 pnode-id:1, cs(Unconnected), prole(Unknown), cflag(0x0), scf(0x0): Starting receiver thread (from worker [2928])
00000061 10/26/2020 16:25:03.3140159 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012C706040] Worker should not initiate state changes with CS_SERIALIZE current:FFFFE0012C707160 resource->worker.task:FFFFE0012C513C60
00000062 10/26/2020 16:25:03.3140398 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Unconnected), prole(Unknown), cflag(0x0), scf(0x2a): conn_connect, conn( Unconnected -> Connecting ) |
00000063 .. [PROTOCOL:55]연결 후 로컬이 허용하는 protocol version을 출력하며 protocol version은 하위호환을 지원합니다.
| Code Block |
|---|
00000063 10/26/2020 16:25:06.3224961 [bsr_do_features] [PROTOCOL:55] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): Handshake to peer 1 successful: Agreed network protocol version 114
00000064 10/26/2020 16:25:06.3225110 [bsr_do_features] [PROTOCOL:56] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): Feature flags enabled on protocol level: 0x7 TRIM THIN_RESYNC WRITE_SAME. |
00000065 .. [SEND BUFFER:27]로컬 send-buffer 사용 여부와 사용할 경우 send-buffer 할당 크기를 출력합니다. 만약 버퍼 할당을 위한 메모리가 부족하면 send-buffer가 할당에 실패하고 버퍼링 없이 동작합니다.
| Code Block |
|---|
00000065 10/26/2020 16:25:06.3231473 [conn_connect] [SEND BUFFER:27] bsr_warn<4> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): send-buffering disabled nc->sndbuf_size:0
00000066 10/26/2020 16:25:06.3231590 [bsr_thread_start] [THREAD:11] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): Starting ack_recv thread (from receiver [1700])
00000067 10/26/2020 16:25:06.3374818 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012CBD2040] Worker should not initiate state changes with CS_SERIALIZE current:FFFFE0012C7CCC20 resource->worker.task:FFFFE0012C513C60
00000068 10/26/2020 16:25:06.3375354 [change_cluster_wide_state] [TWOPC:34] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): Preparing cluster-wide state change 177619259 (0->1 499/146)
00000069 10/26/2020 16:25:06.3375466 [change_cluster_wide_state] [TWOPC:35] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): [TWOPC:177619259] target_node_id(1) conn(Connected) repl(-) disk(-) pdsk(-) role(Secondary) peer(-) flags (2058)
00000070 10/26/2020 16:25:06.3384621 [change_cluster_wide_state] [TWOPC:36] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): [TWOPC:177619259] target_node_id(1) get_cluster_wide_reply (3)
00000071 10/26/2020 16:25:06.3384814 [change_cluster_wide_state] [TWOPC:37] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): State change 177619259: primary_nodes=0, weak_nodes=0
00000072 10/26/2020 16:25:06.3384904 [change_cluster_wide_state] [TWOPC:39] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): Committing cluster-wide state change 177619259 (1ms) (0->1)
00000073 10/26/2020 16:25:06.3389819 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0xc), scf(0xa0a): connect_work, conn( Connecting -> Connected ) peer( Unknown -> Secondary ) |
00000074 .. [PROTOCOL:29]피어 노드에게 수신 받은 peer device의 설정 정보가 출력됩니다.
| Code Block |
|---|
00000074 10/26/2020 16:25:06.3391141 [receive_SyncParam] [PROTOCOL:29] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): recv peer device option, resync_rate : 250k, c_plan_ahead : 20k, c_delay_target : 10k, c_fill_target : 100s, c_max_rate : 102400k, c_min_rate : 250k, ov_req_num : 10b, ov_req_interval : 100ms |
00000075 .. [PROTOCOL:32]로컬 노드의 현재 설정 되어 있는 복제 디스크 크기가 출력됩니다.
| Code Block |
|---|
00000075 10/26/2020 16:25:06.3396005 [receive_sizes] [PROTOCOL:32] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): current_mydisk_size: 10860101632 bytes |
00000076 .. [PROTOCOL:33]피어 노드의 현재 설정 되어 있는 복제 디스크 크기와 최대로 설정 할 수 있는 복제 디스크 크기가 출력됩니다.
| Code Block |
|---|
00000076 10/26/2020 16:25:06.3396102 [receive_sizes] [PROTOCOL:33] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): peer_current_size: 10860101632 bytes peer_user_size: 0 bytes peer_disk_size: 10860101632 bytes peer_max_size: 10860101632 bytes |
00000077 .. [PROTOCOL:34]로그는 최근 노드간 연결 후 협의로 설정 되어 있는 복제 디스크 크기가 출력됩니다.
| Code Block |
|---|
00000077 10/26/2020 16:25:06.3396215 [receive_sizes] [PROTOCOL:34] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): md_effective_size: 21211136 my_user_size: 0 my_max_size: 21211136
00000078 10/26/2020 16:25:06.3396295 [get_max_agreeable_size] [VOLUME:98] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): Skip the replication volume size comparison because it is a local node id(0)
00000079 10/26/2020 16:25:06.3396358 [get_max_agreeable_size] [VOLUME:99] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): node id(1) bitmap index(0) bitmap uuid(0x0) flags(0x10) max size(21211136) disk state(DUnknown)
00000080 10/26/2020 16:25:06.3396463 [receive_sizes] [PROTOCOL:39] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): Proceed with device size setting
00000081 10/26/2020 16:25:06.3397114 [get_max_agreeable_size] [VOLUME:98] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): Skip the replication volume size comparison because it is a local node id(0)
00000082 10/26/2020 16:25:06.3397234 [get_max_agreeable_size] [VOLUME:99] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): node id(1) bitmap index(0) bitmap uuid(0x0) flags(0x10) max size(21211136) disk state(DUnknown) |
disconnect
disconnect 명령의 시작 로그 입니다.
| Code Block |
|---|
00000093 10/26/2020 16:37:52.2808432 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_DISCONNECT:11 command has been received. Execute the command.
00000094 10/26/2020 16:37:52.2808549 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012B69D880] Worker should not initiate state changes with CS_SERIALIZE current:FFFFF800A6319BD0 resource->worker.task:FFFFE0012C513C60
00000095 10/26/2020 16:37:52.2808836 [change_cluster_wide_state] [TWOPC:34] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x28): Preparing cluster-wide state change 3319182627 (0->1 496/16)
00000096 10/26/2020 16:37:52.2808878 [change_cluster_wide_state] [TWOPC:35] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x28): [TWOPC:3319182627] target_node_id(1) conn(Disconnecting) repl(-) disk(-) pdsk(-) role(-) peer(-) flags (8)
00000097 10/26/2020 16:37:52.2812432 [change_cluster_wide_state] [TWOPC:36] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x28): [TWOPC:3319182627] target_node_id(1) get_cluster_wide_reply (3)
00000098 10/26/2020 16:37:52.2812481 [change_cluster_wide_state] [TWOPC:37] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x28): State change 3319182627: primary_nodes=0, weak_nodes=0
00000099 10/26/2020 16:37:52.2812511 [change_cluster_wide_state] [TWOPC:38] bsr_info<6> bsr r0 pnode-id:1, cs(Connected), prole(Secondary), cflag(0x10e), scf(0x28): Cluster is now split
00000100 10/26/2020 16:37:52.2812540 [change_cluster_wide_state] [TWOPC:39] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x28): Committing cluster-wide state change 3319182627 (1ms) (0->1) |
00000101 .. [STATE:19]disconnect 명령으로 연결을 직접 종료할 경우 연결 상태가 StandAlone으로 변경됩니다.
| Code Block |
|---|
00000101 10/26/2020 16:37:52.2813798 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Connected), prole(Secondary), cflag(0x10e), scf(0x208): conn_try_disconnect, conn( Connected -> Disconnecting ) peer( Secondary -> Unknown )
00000102 10/26/2020 16:37:52.2813842 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(UpToDate), prpl(Established), pdvflag(0x100600): conn_try_disconnect, pdsk( UpToDate -> DUnknown ) repl( Established -> Off )
00000103 10/26/2020 16:37:52.2814295 [bsr_recv] [SOCKET:15] bsr_info<6> bsr r0 pnode-id:1, cs(Connected), prole(Secondary), cflag(0x10e), scf(0x208): Data stream socket receive error(-15)
00000104 10/26/2020 16:37:52.2814897 [bsr_ack_receiver] [CONNECTION:16] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x0): ack_receiver terminated
00000105 10/26/2020 16:37:52.2814968 [bsr_thread_setup] [THREAD:9] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x0): Terminating ack_recv thread
00000106 10/26/2020 16:37:52.2817384 [w_resync_timer] [RESYNC/OV:105] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): The resync is complete because it is not in VerifyS or SyncTarget replication state.
00000107 10/26/2020 16:37:52.2820403 [conn_disconnect] [CONNECTION:9] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x0): Connection closed
00000108 10/26/2020 16:37:52.2820944 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x23): conn_disconnect, conn( Disconnecting -> StandAlone )
00000109 10/26/2020 16:37:52.2821351 [bsr_thread_setup] [THREAD:9] bsr_info<6> bsr r0 pnode-id:1, cs(StandAlone), prole(Unknown), cflag(0x10e), scf(0x0): Terminating receiver thread
00000110 10/26/2020 16:37:52.2823823 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_DISCONNECT:11 command execution terminated. (pending command:0) |
up
다음은 bsradm up 명령에 따른 일련의 로그의 예 이며, 순차적으로 수행되는 개별 동작 로그에 대해 설명합니다.
| Info |
|---|
up 명령은 리소스를 기동하는 명령으로 리소스를 기동하기 위해 필요한 여러 단계의 명령을 순차적으로 수행합니다. new-resource, new-minor, new-peer, new-path, attach, connect 명령들이 순차적으로 수행됩니다. |
| Code Block |
|---|
00000018 10/26/2020 16:25:03.2195574 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_RESOURCE:7 command has been received. Execute the command.
00000019 10/26/2020 16:25:03.2195696 [bsr_thread_start] [THREAD:12] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x0): Starting worker thread (from not_bsr_thread [0])
00000020 10/26/2020 16:25:03.2197637 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_RESOURCE:7 command execution terminated. (pending command:0)
00000021 10/26/2020 16:25:03.2278267 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_MINOR:5 command has been received. Execute the command.
00000022 10/26/2020 16:25:03.2278667 [bsr_create_device] [VOLUME:10] bsr_info<6> [0xFFFFE0012A786040] The capacity of the create device(FFFFE0012CAD1AB0) is max sectors(21211136), size(10860101632 bytes)
00000023 10/26/2020 16:25:03.2280254 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_MINOR:5 command execution terminated. (pending command:0)
00000024 10/26/2020 16:25:03.2352395 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_PEER:44 command has been received. Execute the command.
00000025 10/26/2020 16:25:03.2352568 [bsr_create_peer_device_default_config] [GENL:45] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): default peer device option. resync_rate : 250k, c_plan_ahead : 20k, c_delay_target : 10k, c_fill_target : 100s, c_max_rate : 102400k, c_min_rate : 250k, ov_req_num : 10b, ov_req_interval : 100ms
00000026 10/26/2020 16:25:03.2352753 [bsr_thread_start] [THREAD:11] bsr_info<6> bsr r0 pnode-id:1, cs(StandAlone), prole(Unknown), cflag(0x0), scf(0x0): Starting sender thread (from not_bsr_thread [0])
00000027 10/26/2020 16:25:03.2354514 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B69D880] BSR_ADM_NEW_PEER:44 command execution terminated. (pending command:0)
00000028 10/26/2020 16:25:03.2442056 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_PATH:45 command has been received. Execute the command.
00000029 10/26/2020 16:25:03.2444816 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012A786040] BSR_ADM_NEW_PATH:45 command execution terminated. (pending command:0)
00000030 10/26/2020 16:25:03.2884146 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B2FC880] BSR_ADM_ATTACH:12 command has been received. Execute the command.
00000031 10/26/2020 16:25:03.2889320 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012B2FC880] Worker should not initiate state changes with CS_SERIALIZE current:FFFFF800A6319BD0 resource->worker.task:FFFFE0012C513C60
00000032 10/26/2020 16:25:03.2889474 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(Diskless), dvflag(0x0): change_disk_state, disk( Diskless -> Attaching )
00000033 10/26/2020 16:25:03.2890049 [FsctlLockVolume] [VOLUME:65] bsr_info<6> [0xFFFFE0012B2FC880] try lock volume(\Device\HarddiskVolume2)
00000034 10/26/2020 16:25:03.2959696 [FsctlLockVolume] [VOLUME:23] bsr_info<6> [0xFFFFE0012B2FC880] volume(\Device\HarddiskVolume2) locked. handle(0xFFFFFFFF80000AFC)
00000035 10/26/2020 16:25:03.2959798 [FsctlFlushDismountVolume] [VOLUME:62] bsr_info<6> [0xFFFFE0012B2FC880] try flush volume(\Device\HarddiskVolume2)
00000036 10/26/2020 16:25:03.2959854 [FsctlFlushDismountVolume] [VOLUME:17] bsr_info<6> [0xFFFFE0012B2FC880] Failed to flush volume. status(0xc000026e)
00000037 10/26/2020 16:25:03.2959874 [FsctlFlushDismountVolume] [VOLUME:63] bsr_info<6> [0xFFFFE0012B2FC880] volume(\Device\HarddiskVolume2) flushed
00000038 10/26/2020 16:25:03.2959893 [FsctlFlushDismountVolume] [VOLUME:64] bsr_info<6> [0xFFFFE0012B2FC880] try dismount volume(\Device\HarddiskVolume2)
00000039 10/26/2020 16:25:03.2965893 [FsctlFlushDismountVolume] [VOLUME:19] bsr_info<6> [0xFFFFE0012B2FC880] volume(\Device\HarddiskVolume2) dismounted
00000040 10/26/2020 16:25:03.2965979 [FsctlUnlockVolume] [VOLUME:61] bsr_info<6> [0xFFFFE0012B2FC880] unlock volume(\Device\HarddiskVolume2)
00000041 10/26/2020 16:25:03.2969597 [FsctlUnlockVolume] [VOLUME:26] bsr_info<6> [0xFFFFE0012B2FC880] volume(\Device\HarddiskVolume2) unlocked
00000042 10/26/2020 16:25:03.2969738 [bsr_adm_attach] [GENL:36] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): The maximum number of bitmap peer devices is 1.
00000043 10/26/2020 16:25:03.2979413 [bsr_bump_write_ordering] [VOLUME:66] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x1): Method to ensure write ordering: drain
00000044 10/26/2020 16:25:03.2979447 [get_max_agreeable_size] [VOLUME:98] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): Skip the replication volume size comparison because it is a local node id(0)
00000045 10/26/2020 16:25:03.2979474 [get_max_agreeable_size] [VOLUME:99] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): node id(1) bitmap index(0) bitmap uuid(0x0) flags(0x10) max size(0) disk state(DUnknown)
00000046 10/26/2020 16:25:03.2979681 [get_max_agreeable_size] [VOLUME:98] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): Skip the replication volume size comparison because it is a local node id(0)
00000047 10/26/2020 16:25:03.2979705 [get_max_agreeable_size] [VOLUME:99] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): node id(1) bitmap index(0) bitmap uuid(0x0) flags(0x10) max size(0) disk state(DUnknown)
00000048 10/26/2020 16:25:03.2979742 [bsr_bm_resize] [BITMAP:23] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): Start resizing the bitmap size to disk capacity. capacity sector(21211136)
00000049 10/26/2020 16:25:03.2985588 [bsr_bm_resize] [BITMAP:25] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): The bitmap size has been resized to disk capacity. bits(2651392) words(82856) pages(81) |
00000050 .. [VOLUME:96]attach 대상 복제 볼륨의 크기가 출력됩니다.
| Code Block |
|---|
00000050 10/26/2020 16:25:03.2985622 [bsr_determine_dev_size] [VOLUME:96] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): Update the disk size in the meta. 10 GB (10605568 KB)
00000051 10/26/2020 16:25:03.3028170 [bm_rw_range] [BITMAP:29] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): Recounting of set bits took additional 0ms
00000052 10/26/2020 16:25:03.3028240 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012B2FC880] Worker should not initiate state changes with CS_SERIALIZE current:FFFFF800A6319BD0 resource->worker.task:FFFFE0012C513C60
00000053 10/26/2020 16:25:03.3028465 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): change_disk_state, disk( Attaching -> UpToDate )
|
00000054 .. [UUID:14]attach 대상 복제 볼륨의 current UUID가 출력됩니다.
| Code Block |
|---|
00000054 10/26/2020 16:25:03.3028511 [finish_state_change] [UUID:14] bsr_info<6> bsr r0/0 minor 2, ds(Attaching), dvflag(0x0): attached to current UUID: A95D18E8D4AE8C78
00000055 10/26/2020 16:25:03.3033626 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B2FC880] BSR_ADM_ATTACH:12 command execution terminated. (pending command:0) |
connect 명령을 수행합니다.
| Code Block |
|---|
00000059 10/26/2020 16:25:03.3139110 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B2F9880] BSR_ADM_CONNECT:10 command execution terminated. (pending command:0)
00000060 10/26/2020 16:25:03.3139464 [bsr_thread_start] [THREAD:11] bsr_info<6> bsr r0 pnode-id:1, cs(Unconnected), prole(Unknown), cflag(0x0), scf(0x0): Starting receiver thread (from worker [2928])
00000061 10/26/2020 16:25:03.3140159 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012C706040] Worker should not initiate state changes with CS_SERIALIZE current:FFFFE0012C707160 resource->worker.task:FFFFE0012C513C60
00000062 10/26/2020 16:25:03.3140398 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Unconnected), prole(Unknown), cflag(0x0), scf(0x2a): conn_connect, conn( Unconnected -> Connecting )
00000063 10/26/2020 16:25:06.3224961 [bsr_do_features] [PROTOCOL:55] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): Handshake to peer 1 successful: Agreed network protocol version 114
00000064 10/26/2020 16:25:06.3225110 [bsr_do_features] [PROTOCOL:56] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): Feature flags enabled on protocol level: 0x7 TRIM THIN_RESYNC WRITE_SAME.
00000065 10/26/2020 16:25:06.3231473 [conn_connect] [SEND BUFFER:27] bsr_warn<4> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): send-buffering disabled nc->sndbuf_size:0
00000066 10/26/2020 16:25:06.3231590 [bsr_thread_start] [THREAD:11] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0x0), scf(0x0): Starting ack_recv thread (from receiver [1700])
00000067 10/26/2020 16:25:06.3374818 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012CBD2040] Worker should not initiate state changes with CS_SERIALIZE current:FFFFE0012C7CCC20 resource->worker.task:FFFFE0012C513C60
00000068 10/26/2020 16:25:06.3375354 [change_cluster_wide_state] [TWOPC:34] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): Preparing cluster-wide state change 177619259 (0->1 499/146)
00000069 10/26/2020 16:25:06.3375466 [change_cluster_wide_state] [TWOPC:35] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): [TWOPC:177619259] target_node_id(1) conn(Connected) repl(-) disk(-) pdsk(-) role(Secondary) peer(-) flags (2058)
00000070 10/26/2020 16:25:06.3384621 [change_cluster_wide_state] [TWOPC:36] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): [TWOPC:177619259] target_node_id(1) get_cluster_wide_reply (3)
00000071 10/26/2020 16:25:06.3384814 [change_cluster_wide_state] [TWOPC:37] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): State change 177619259: primary_nodes=0, weak_nodes=0
00000072 10/26/2020 16:25:06.3384904 [change_cluster_wide_state] [TWOPC:39] bsr_info<6> bsr r0, r(Secondary), f(0x0), scf(0x82a): Committing cluster-wide state change 177619259 (1ms) (0->1)
00000073 10/26/2020 16:25:06.3389819 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Connecting), prole(Unknown), cflag(0xc), scf(0xa0a): connect_work, conn( Connecting -> Connected ) peer( Unknown -> Secondary )
00000074 10/26/2020 16:25:06.3391141 [receive_SyncParam] [PROTOCOL:29] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): recv peer device option, resync_rate : 250k, c_plan_ahead : 20k, c_delay_target : 10k, c_fill_target : 100s, c_max_rate : 102400k, c_min_rate : 250k, ov_req_num : 10b, ov_req_interval : 100ms
00000075 10/26/2020 16:25:06.3396005 [receive_sizes] [PROTOCOL:32] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): current_mydisk_size: 10860101632 bytes
00000076 10/26/2020 16:25:06.3396102 [receive_sizes] [PROTOCOL:33] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): peer_current_size: 10860101632 bytes peer_user_size: 0 bytes peer_disk_size: 10860101632 bytes peer_max_size: 10860101632 bytes
00000077 10/26/2020 16:25:06.3396215 [receive_sizes] [PROTOCOL:34] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): md_effective_size: 21211136 my_user_size: 0 my_max_size: 21211136
00000078 10/26/2020 16:25:06.3396295 [get_max_agreeable_size] [VOLUME:98] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): Skip the replication volume size comparison because it is a local node id(0)
00000079 10/26/2020 16:25:06.3396358 [get_max_agreeable_size] [VOLUME:99] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): node id(1) bitmap index(0) bitmap uuid(0x0) flags(0x10) max size(21211136) disk state(DUnknown)
00000080 10/26/2020 16:25:06.3396463 [receive_sizes] [PROTOCOL:39] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): Proceed with device size setting
00000081 10/26/2020 16:25:06.3397114 [get_max_agreeable_size] [VOLUME:98] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): Skip the replication volume size comparison because it is a local node id(0)
00000082 10/26/2020 16:25:06.3397234 [get_max_agreeable_size] [VOLUME:99] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): node id(1) bitmap index(0) bitmap uuid(0x0) flags(0x10) max size(21211136) disk state(DUnknown) |
down
bsradm down 명령에서 순차적으로 수행하는 개별 동작 로그에 대해 설명합니다.
| Info |
|---|
down 은 리소스를 볼륨에 대한 베타적 락 획득, Flush, dismount, 연결 해제, 볼륨 잠금의 순서로 수행합니다. |
| Code Block |
|---|
00000398 10/26/2020 16:49:10.2436929 [NetlinkWorkThread] [NETLINK:18] bsr_info<6> [0xFFFFE0012B2F9880] BSR_ADM_DOWN:27 command has been received. Execute the command. |
00000399 .. [VOLUME:65],00000680 .. [VOLUME:23]복제 볼륨에 대한 베타적 락 획득을 시도합니다. 베타적 락이 다른 프로세스에 의해 이미 획득된 상태이면 이 시도는 실패할 수 있습니다. 이 시도가 실패되더라도 무시하고 다음 단계로 넘어갑니다.
| Code Block |
|---|
00000399 10/26/2020 16:49:10.2437390 [FsctlLockVolume] [VOLUME:65] bsr_info<6> [0xFFFFE0012B2F9880] try lock volume(\Device\HarddiskVolume2)
00000472 10/26/2020 16:49:10.2864430 [FsctlLockVolume] [VOLUME:23] bsr_info<6> [0xFFFFE0012B2F9880] volume(\Device\HarddiskVolume2) locked. handle(0xFFFFFFFF80000C20) |
00000473 .. [VOLUME:62],00000474 .. [VOLUME:63]복제 볼륨에 대한 캐쉬 flush 를 수행합니다.
| Code Block |
|---|
00000473 10/26/2020 16:49:10.2864535 [FsctlFlushDismountVolume] [VOLUME:62] bsr_info<6> [0xFFFFE0012B2F9880] try flush volume(\Device\HarddiskVolume2)
00000474 10/26/2020 16:49:10.2864915 [FsctlFlushDismountVolume] [VOLUME:63] bsr_info<6> [0xFFFFE0012B2F9880] volume(\Device\HarddiskVolume2) flushed |
00000475 .. [VOLUME:64],00000476 .. [VOLUME:19]복제 볼륨 dismount 를 수행합니다.
| Code Block |
|---|
00000475 10/26/2020 16:49:10.2864954 [FsctlFlushDismountVolume] [VOLUME:64] bsr_info<6> [0xFFFFE0012B2F9880] try dismount volume(\Device\HarddiskVolume2)
00000479 10/26/2020 16:49:10.2871632 [FsctlFlushDismountVolume] [VOLUME:19] bsr_info<6> [0xFFFFE0012B2F9880] volume(\Device\HarddiskVolume2) dismounted |
00000480 .. [STATE:18]role이 primary 이면 secondary 로 먼저 강등합니다.
| Code Block |
|---|
00000480 10/26/2020 16:49:10.2871910 [print_state_change] [STATE:18] bsr_info<6> bsr r0, r(Primary), f(0x1), scf(0x83c): change_role, role( Primary -> Secondary )
00000481 10/26/2020 16:49:10.2879558 [__receive_uuids] [UUID:16] bsr_warn<4> bsr r0/0 minor 2 pnode-id:1, pdsk(UpToDate), prpl(Established), pdvflag(0x100600): receive new current but not update UUID: CE5CC8B0672E645C
00000482 10/26/2020 16:49:10.2879607 [bsr_uuid_compare] [RESYNC/OV:197] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x2): Local and peer current UUIDs are the same. rule(40), res(0) |
00000483 .. [VOLUME:61],00000691 .. [VOLUME:26]복제 볼륨에 대한 베타적 락을 가지고 있었다면 반환합니다.
| Code Block |
|---|
00000483 10/26/2020 16:49:10.2881069 [FsctlUnlockVolume] [VOLUME:61] bsr_info<6> [0xFFFFE0012B2F9880] unlock volume(\Device\HarddiskVolume2)
00000484 10/26/2020 16:49:10.2889783 [FsctlUnlockVolume] [VOLUME:26] bsr_info<6> [0xFFFFE0012B2F9880] volume(\Device\HarddiskVolume2) unlocked
00000485 10/26/2020 16:49:10.2890044 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012B2F9880] Worker should not initiate state changes with CS_SERIALIZE current:FFFFF800A6319BD0 resource->worker.task:FFFFE0012C7D29A0 |
disconnect 를 수행합니다.
| Code Block |
|---|
00000486 10/26/2020 16:49:10.2890183 [change_cluster_wide_state] [TWOPC:34] bsr_info<6> bsr r0, r(Secondary), f(0x1), scf(0x28): Preparing cluster-wide state change 1805107054 (0->1 496/16)
00000487 10/26/2020 16:49:10.2890209 [change_cluster_wide_state] [TWOPC:35] bsr_info<6> bsr r0, r(Secondary), f(0x1), scf(0x28): [TWOPC:1805107054] target_node_id(1) conn(Disconnecting) repl(-) disk(-) pdsk(-) role(-) peer(-) flags (8)
00000488 10/26/2020 16:49:10.2893052 [change_cluster_wide_state] [TWOPC:36] bsr_info<6> bsr r0, r(Secondary), f(0x1), scf(0x28): [TWOPC:1805107054] target_node_id(1) get_cluster_wide_reply (3)
00000489 10/26/2020 16:49:10.2893089 [change_cluster_wide_state] [TWOPC:37] bsr_info<6> bsr r0, r(Secondary), f(0x1), scf(0x28): State change 1805107054: primary_nodes=0, weak_nodes=0
00000490 10/26/2020 16:49:10.2893113 [change_cluster_wide_state] [TWOPC:38] bsr_info<6> bsr r0 pnode-id:1, cs(Connected), prole(Secondary), cflag(0x10e), scf(0x28): Cluster is now split
00000491 10/26/2020 16:49:10.2893140 [change_cluster_wide_state] [TWOPC:39] bsr_info<6> bsr r0, r(Secondary), f(0x1), scf(0x28): Committing cluster-wide state change 1805107054 (1ms) (0->1)
00000492 10/26/2020 16:49:10.2895017 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Connected), prole(Secondary), cflag(0x10e), scf(0x208): conn_try_disconnect, conn( Connected -> Disconnecting ) peer( Secondary -> Unknown )
00000493 10/26/2020 16:49:10.2895061 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(UpToDate), prpl(Established), pdvflag(0x100600): conn_try_disconnect, pdsk( UpToDate -> DUnknown ) repl( Established -> Off )
00000494 10/26/2020 16:49:10.2895371 [bsr_recv] [SOCKET:15] bsr_info<6> bsr r0 pnode-id:1, cs(Connected), prole(Secondary), cflag(0x10e), scf(0x208): Data stream socket receive error(-15)
00000495 10/26/2020 16:49:10.2895990 [bsr_ack_receiver] [CONNECTION:16] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x0): ack_receiver terminated
00000496 10/26/2020 16:49:10.2896039 [bsr_thread_setup] [THREAD:9] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x0): Terminating ack_recv thread
00000497 10/26/2020 16:49:10.2897546 [w_resync_timer] [RESYNC/OV:105] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x0): The resync is complete because it is not in VerifyS or SyncTarget replication state.
00000498 10/26/2020 16:49:10.2900523 [conn_disconnect] [CONNECTION:9] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x0): Connection closed
00000499 10/26/2020 16:49:10.2900922 [print_state_change] [STATE:19] bsr_info<6> bsr r0 pnode-id:1, cs(Disconnecting), prole(Unknown), cflag(0x10e), scf(0x23): conn_disconnect, conn( Disconnecting -> StandAlone )
00000500 10/26/2020 16:49:10.2901181 [bsr_thread_setup] [THREAD:9] bsr_info<6> bsr r0 pnode-id:1, cs(StandAlone), prole(Unknown), cflag(0x10e), scf(0x0): Terminating receiver thread
00000501 10/26/2020 16:49:10.2901744 [bsr_thread_setup] [THREAD:9] bsr_info<6> bsr r0 pnode-id:1, cs(StandAlone), prole(Unknown), cflag(0x10e), scf(0x0): Terminating sender thread
00000502 10/26/2020 16:49:10.2902522 [bsr_destroy_connection] [CONNECTION:1] bsr_info<6> bsr r0 pnode-id:1, cs(StandAlone), prole(Unknown), cflag(0x110e), scf(0x0): The connection object is removed.
00000503 10/26/2020 16:49:10.2902683 [state_change_lock] [STATE:40] bsr_info<6> [0xFFFFE0012B2F9880] Worker should not initiate state changes with CS_SERIALIZE current:FFFFF800A6319BD0 resource->worker.task:FFFFE0012C7D29A0 |
00000504 .. [STATE:20]detaching 상태 변경이 출력됩니다.
| Code Block |
|---|
00000504 10/26/2020 16:49:10.2902780 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x2): change_disk_state, disk( UpToDate -> Detaching ) |
00000715 .. [UUID?:19]detaching 시 복제 볼륨의 current UUID 가 출력됩니다.
| Code Block |
|---|
00000505 10/26/2020 16:49:10.2902819 [finish_state_change] [UUID:19] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x10002): detaching to current UUID: CE5CC8B0672E645C
00000506 10/26/2020 16:49:10.2903353 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(Detaching), dvflag(0x1002): change_disk_state, disk( Detaching -> Diskless )
00000507 10/26/2020 16:49:10.2909946 [bsr_bm_resize] [BITMAP:23] bsr_info<6> bsr r0/0 minor 2, ds(Diskless), dvflag(0x2): Start resizing the bitmap size to disk capacity. capacity sector(0)
00000508 10/26/2020 16:49:10.2912038 [bsr_thread_setup] [THREAD:10] bsr_info<6> bsr r0, r(Secondary), f(0x1), scf(0x0): Terminating worker thread
00000509 10/26/2020 16:49:10.2912489 [mvolWorkThread] [THREAD:20] bsr_info<6> [0xFFFFE0012CBCF880] Terminating mvolWorkThread
00000510 10/26/2020 16:49:10.2914483 [NetlinkWorkThread] [NETLINK:20] bsr_info<6> [0xFFFFE0012B2F9880] BSR_ADM_DOWN:27 command execution terminated. (pending command:0) |
동기화
syncsource
다음은 syncsource 의 동기화 시작 로그입니다.
| Code Block |
|---|
00000322 10/26/2020 16:48:53.1027626 [__receive_uuids] [UUID:16] bsr_warn<4> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): receive new current but not update UUID: A95D18E8D4AE8C78
00000323 10/26/2020 16:48:53.1027665 [bsr_uuid_compare] [RESYNC/OV:202] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): Peer UUID and local bitmap UUID are the same. rule(70), res(2) |
00000324 .. [RESYNC/OV:73]로컬 노드와 피어 노드의 동기화 핸드쉐이크를 시작합니다.
| Code Block |
|---|
00000324 10/26/2020 16:48:53.1029289 [log_handshake] [RESYNC/OV:73] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): bsr_sync_handshake: |
00000325 .. [RESYNC/OV:65]로컬의 UUID가 출력됩니다.
| Code Block |
|---|
00000325 10/26/2020 16:48:53.1029330 [bsr_uuid_dump_self] [RESYNC/OV:65] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): self CE5CC8B0672E645D:A95D18E8D4AE8C78:3DF87D1E1EFC3E92:3550951C1AA84A92 bits:0 flags:20 |
00000326 .. [RESYNC/OV:66]피어의 UUID가 출력됩니다.
| Code Block |
|---|
00000326 10/26/2020 16:48:53.1029384 [bsr_uuid_dump_peer] [RESYNC/OV:66] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): peer A95D18E8D4AE8C78:0000000000000000:3DF87D1E1EFC3E92:3550951C1AA84A92 bits:0 flags:100 |
00000327 .. [RESYNC/OV:202],00000599 .. [RESYNC/OV:75]로컬과 피어의 uuid compare 결과가 출력됩니다.
| Code Block |
|---|
00000327 10/26/2020 16:48:53.1029433 [bsr_uuid_compare] [RESYNC/OV:202] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): Peer UUID and local bitmap UUID are the same. rule(70), res(2)
00000328 10/26/2020 16:48:53.1029467 [bsr_handshake] [RESYNC/OV:75] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): uuid_compare(2) by rule 70
00000329 10/26/2020 16:48:53.1029713 [receive_state] [STATE:8] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): Receive new repl state "WFBitMapS"
00000330 10/26/2020 16:48:53.1029830 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(DUnknown), prpl(Off), pdvflag(0x100000): receive_state, pdsk( DUnknown -> Consistent ) repl( Off -> WFBitMapS )
00000331 10/26/2020 16:48:53.1030835 [bsr_queue_bitmap_io] [RESYNC/OV:33] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): send_bitmap (WFBitMapS), worker.task(FFFFE0012C7D29A0), current(FFFFE0012C7D29A0)
00000332 10/26/2020 16:48:53.1048104 [receive_state] [STATE:8] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Consistent), prpl(WFBitMapS), pdvflag(0x100600): Receive new repl state "WFBitMapS"
00000333 10/26/2020 16:48:53.1048248 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Consistent), prpl(WFBitMapS), pdvflag(0x100600): receive_state, pdsk( Consistent -> Outdated ) |
00000334 .. [BITMAP:50]로컬의 비트맵이 피어 노드에 전송 완료 되었습니다.
| Code Block |
|---|
00000334 10/26/2020 16:48:53.1049603 [INFO_bm_xfer_stats] [BITMAP:50] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Outdated), prpl(WFBitMapS), pdvflag(0x100600): send bitmap stats [Bytes(packets)]: plain 0(0), RLE 23(1), total 23; compression: 100.0% |
00000335 .. [BITMAP:50]피어 노드의 비트맵이 로컬에서 수신 완료 되었습니다.
| Code Block |
|---|
00000335 10/26/2020 16:48:53.1065768 [INFO_bm_xfer_stats] [BITMAP:50] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Outdated), prpl(WFBitMapS), pdvflag(0x100600): receive bitmap stats [Bytes(packets)]: plain 0(0), RLE 23(1), total 23; compression: 100.0% |
00000336 .. [BITMAP:52]비트맵 교환이 완료되었습니다.
| Code Block |
|---|
00000336 10/26/2020 16:48:53.1065812 [receive_bitmap_finished] [BITMAP:52] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Outdated), prpl(WFBitMapS), pdvflag(0x100600): Send that bitmap exchange has been completed
00000337 10/26/2020 16:48:53.1066753 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Outdated), prpl(WFBitMapS), pdvflag(0x100600): bsr_start_resync, pdsk( Outdated -> Inconsistent ) repl( WFBitMapS -> SyncSource ) |
00000338 .. [RESYNC/OV:144]동기화가 시작되고 동기화 해야할 데이터 크기가 출력됩니다.
| Code Block |
|---|
00000338 10/26/2020 16:48:53.1067116 [bsr_start_resync] [RESYNC/OV:144] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Inconsistent), prpl(SyncSource), pdvflag(0x100600): Began resync as SyncSource (will sync 0 KB [0 bits set]).
00000339 10/26/2020 16:48:53.1087501 [receive_state] [STATE:8] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Inconsistent), prpl(SyncSource), pdvflag(0x100600): Receive new repl state "SyncSource"
00000340 10/26/2020 16:48:53.1170857 [__receive_uuids] [UUID:16] bsr_warn<4> bsr r0/0 minor 2 pnode-id:1, pdsk(Inconsistent), prpl(SyncSource), pdvflag(0x100600): receive new current but not update UUID: CE5CC8B0672E645C
00000341 10/26/2020 16:48:53.1170913 [bsr_uuid_compare] [RESYNC/OV:197] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): Local and peer current UUIDs are the same. rule(40), res(0) |
00000342 .. [UUID:1]동기화 완료 후 새로 지정되는 UUID 정보가 출력됩니다.
| Code Block |
|---|
00000342 10/26/2020 16:48:53.1170949 [bsr_print_uuids] [UUID:1] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Inconsistent), prpl(SyncSource), pdvflag(0x100600): bsr_uuid_detect_finished_resyncs, updated UUIDs CE5CC8B0672E645D:0000000000000000:A95D18E8D4AE8C78:3DF87D1E1EFC3E92 |
00000613 .. [RESYNC/OV:116]동기화 완료 후 동기화 진행 시간 및 속도가 출력됩니다.
| Code Block |
|---|
00000343 10/26/2020 16:48:53.1180660 [bsr_resync_finished] [RESYNC/OV:116] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Inconsistent), prpl(SyncSource), pdvflag(0x100600): Resync done (total 1 sec; paused 0 sec; 0 K/sec), hit bit (in sync 0; marked rl 0)
00000344 10/26/2020 16:48:53.1180792 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(Inconsistent), prpl(SyncSource), pdvflag(0x100600): bsr_resync_finished, pdsk( Inconsistent -> UpToDate ) repl( SyncSource -> Established )
00000345 10/26/2020 16:48:53.1181716 [bsr_queue_bitmap_io] [RESYNC/OV:33] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x0): write from resync_finished, worker.task(FFFFE0012C7D29A0), current(FFFFE0012C7D29A0)
00000346 10/26/2020 16:48:53.1182718 [receive_state] [STATE:8] bsr_info<6> bsr r0/0 minor 2 pnode-id:1, pdsk(UpToDate), prpl(Established), pdvflag(0x100600): Receive new repl state "Established" |
synctarget
다음은 synctarget에서 동기화 시작 로그입니다.
| Info |
|---|
syncsource와 중복되는 로그는 설명하지 않습니다. |
비트맵 교환 과정은 syncsource와 동일합니다.
| Code Block |
|---|
00000210 10/26/2020 16:48:52.7780270 [bsr_uuid_compare] [RESYNC/OV:198] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x20000): The local current UUID is the same as the peer bitmap UUID. rule(50), res(-2)
00000211 10/26/2020 16:48:52.7780426 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x20000): __receive_uuids, disk( UpToDate -> Outdated )
00000212 10/26/2020 16:48:52.7789223 [log_handshake] [RESYNC/OV:73] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(DUnknown), prpl(Off), pdvflag(0x100200): bsr_sync_handshake:
00000213 10/26/2020 16:48:52.7789252 [bsr_uuid_dump_self] [RESYNC/OV:65] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(DUnknown), prpl(Off), pdvflag(0x100200): self A95D18E8D4AE8C78:0000000000000000:3DF87D1E1EFC3E92:3550951C1AA84A92 bits:0 flags:100
00000214 10/26/2020 16:48:52.7789291 [bsr_uuid_dump_peer] [RESYNC/OV:66] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(DUnknown), prpl(Off), pdvflag(0x100200): peer CE5CC8B0672E645D:A95D18E8D4AE8C78:3DF87D1E1EFC3E92:3550951C1AA84A92 bits:0 flags:20
00000215 10/26/2020 16:48:52.7789328 [bsr_uuid_compare] [RESYNC/OV:198] bsr_info<6> bsr r0/0 minor 2, ds(Outdated), dvflag(0x20000): The local current UUID is the same as the peer bitmap UUID. rule(50), res(-2)
00000216 10/26/2020 16:48:52.7789352 [bsr_handshake] [RESYNC/OV:75] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(DUnknown), prpl(Off), pdvflag(0x100200): uuid_compare(-2) by rule 50
00000217 10/26/2020 16:48:52.7789384 [receive_state] [STATE:8] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(DUnknown), prpl(Off), pdvflag(0x100200): Receive new repl state "WFBitMapT"
00000218 10/26/2020 16:48:52.7789491 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(DUnknown), prpl(Off), pdvflag(0x100200): receive_state, pdsk( DUnknown -> UpToDate ) repl( Off -> WFBitMapT )
00000219 10/26/2020 16:48:52.7790130 [w_after_state_change] [STATE:28] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): Not sending state because of old replication state(Off)
00000220 10/26/2020 16:48:52.7791844 [receive_state] [STATE:8] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): Receive new repl state "WFBitMapT"
00000221 10/26/2020 16:48:52.7797620 [w_after_state_change] [STATE:28] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): Not sending state because of old replication state(WFBitMapT)
00000222 10/26/2020 16:48:52.7798480 [INFO_bm_xfer_stats] [BITMAP:50] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): receive bitmap stats [Bytes(packets)]: plain 0(0), RLE 23(1), total 23; compression: 100.0%
00000223 10/26/2020 16:48:52.7815593 [INFO_bm_xfer_stats] [BITMAP:50] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): send bitmap stats [Bytes(packets)]: plain 0(0), RLE 23(1), total 23; compression: 100.0%
00000224 10/26/2020 16:48:52.7815876 [receive_bm_exchange_state] [BITMAP:44] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): bitmap exchange complete
00000225 10/26/2020 16:48:52.7817559 [receive_state] [STATE:8] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): Receive new repl state "WFBitMapT"
00000226 10/26/2020 16:48:52.7832750 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(Outdated), dvflag(0x0): bsr_start_resync, disk( Outdated -> Inconsistent )
00000227 10/26/2020 16:48:52.7832782 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(WFBitMapT), pdvflag(0x100600): bsr_start_resync, repl( WFBitMapT -> SyncTarget )
00000228 10/26/2020 16:48:52.7833043 [bsr_start_resync] [RESYNC/OV:144] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(SyncTarget), pdvflag(0x100600): Began resync as SyncTarget (will sync 0 KB [0 bits set]).
00000229 10/26/2020 16:48:52.7838039 [__receive_uuids] [UUID:16] bsr_warn<4> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(SyncTarget), pdvflag(0x100600): receive new current but not update UUID: CE5CC8B0672E645D |
00000230 .. [RESYNC/OV:107]synctarget에서 동기화 데이터 요청을 syncsource에 모두 전송 했을때 출력됩니다.
| Code Block |
|---|
00000230 10/26/2020 16:48:52.7915051 [make_resync_request] [RESYNC/OV:107] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(SyncTarget), pdvflag(0x100600): Finished the resync. resync target area does not exist. |
다음은 synctarget의 동기화 완료 로그입니다.
| Code Block |
|---|
00000231 10/26/2020 16:48:52.7918471 [bsr_resync_finished] [RESYNC/OV:116] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(SyncTarget), pdvflag(0x100600): Resync done (total 1 sec; paused 0 sec; 0 K/sec), hit bit (in sync 0; marked rl 0)
00000232 10/26/2020 16:48:52.7918549 [bsr_print_uuids] [UUID:1] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(SyncTarget), pdvflag(0x100600): bsr_resync_finished, updated UUIDs CE5CC8B0672E645C:0000000000000000:A95D18E8D4AE8C78:3DF87D1E1EFC3E92
00000233 10/26/2020 16:48:52.7918808 [print_state_change] [STATE:20] bsr_info<6> bsr r0/0 minor 2, ds(Inconsistent), dvflag(0x20004): bsr_resync_finished, disk( Inconsistent -> UpToDate )
00000234 10/26/2020 16:48:52.7918840 [print_state_change] [STATE:21] bsr_info<6> bsr r0/0 minor 2 pnode-id:0, pdsk(UpToDate), prpl(SyncTarget), pdvflag(0x100600): bsr_resync_finished, repl( SyncTarget -> Established )
00000235 10/26/2020 16:48:52.7927024 [bsr_queue_bitmap_io] [RESYNC/OV:33] bsr_info<6> bsr r0/0 minor 2, ds(UpToDate), dvflag(0x20000): write from resync_finished, worker.task(FFFFE000E4CD8CF0), current(FFFFE000E4CD8CF0) |