Content Comparison

...

1. 바탕화면에 있는 MCCS 바로가기 링크 또는 웹브라우저를 열고 http://127.0.0.1:<UIPort>/main에 접속합니다

     [그림] MCCS 바로가기 링크

    

2. 링크 또는 URL로 접속하게 되면 다음과 같은 웹 화면이 나오게 되며 초기 암호는 'password'로 설정되어 있습니다.
   
   [그림] MCCS 웹 콘솔 접속화면

    

   Info

   Info You can change this Port number in the Heartbeat Setting menu and please, refer to 'Appendix F. Modify HeartBeat Configuration' of MCCS user guide about this.   - ID : Account name to connect MCCS console. Default account is 'admin'. - Password : Default value is 'password'.. Info administrator : This account can all of control of the MCCS for group and resource like add, delete, switch, edit, setting dependency and etc. monitor : This account can only view the state of group and resources. Info You can change this in the Cluster Attributes View from Cluster Attributes tab and please, refer to 'Chapter 2. management Web console' of MCCS user guide about this.

3. [Login] 버튼을 눌러서 초기 핫빗 설정을 시작합니다.
    
   [Figure] Edit heartbeat configuration

...

1. If there was an existing heartbeat configuration, its information will be remained.
   Enter cluster name as your definition and click on "Server Connection" to bring information of host identities. 
   Next step is unable to proceed if the network is not connected. 
    
   [Figure] Initial Heartbeat Settings
2. Enter hostname or IP address of the node. Or enter 127.0.0.1 when you connect to local node.
   MCCS will brings and shows hostname and network informations for the node.
    
   [Figure] Server Connection
   

3. Edit node name as your definition and select IP address for heartbeat and mirror network.
   
   [Figure] Select IP address

   Info
   Default node name is host name of the node. Node name for clustering doest not must be identical to it's host name. MCCS needs at least 2 heartbeat configuration, 3 heartbeat is recommended.

4. Click 'Test' to verify connectivities between two nodes.
   
   [그림] 테스트 확인 후 화면
   

   Warning미러 라인은 복제 프로그램에서 사용될 데이터 복제 네트워크 입니다. 미러 디스크 리소스를 사용하려면 반드시 3개의 핫빗으로 MCCS 를 구성해야 합니다. 또한 미러 디스크 리소스를 포함한 MCCS 를 3개의 핫빗에서 2개의 핫빗으로 변경할 경우 정상적인 동작을 보장할 수 없습니다

   Figure] Verifying connectivities between nodes

   Warning

   Mirror line is data replication network for replication program. Each pair of IP address between nodes must be on the same subnet. If these subnet are not matched between nodes, 'Test' button for verification will not be enabled. When you use mirror disk resource, you can configure three heartbeats. It is highly recommended to configure the heartbeats at least three when you use mirror disk resource.

5. Click 'Yes' button, when you confirm for heartbeat configuration.
   
   [Figure] Applying Heartbeat configuration 
6. Click 'OK' button to complete
   
   [Figure] Heartbeat configuration is completed   

...

1. MCCS 웹 콘솔에 접속합니다. 비밀번호를 입력합니다. 접속을 클릭하여 콘솔에 접속합니다.
   
   [그림] MCCS 웹 콘솔 접속 및 로그인 화면
2. Select Windows(W)->Preferences.
    
   [Figure] MCCS main console 
3. Click 'License Update' button for each node in the 'License Information'.
    
   [Figure] Preferences View 

4. Enter a valid license key (temp. or perm.) for both nodes.
    
   [Figure] Entering an valid license key

   Warning
   ※ License Expire : Temporary license of MCCS is 90 days. It is required to issue new temporary or permanent license before temporary license expires. If there is no license file or license expires after 15 days, MCCS works in restrict mode. So faults occures when MCCS does not failover.

   이 것으로 MCCS를 운영하기 위한 초기 환경 설정이 모두 끝났습니다.  이제부터는 노드에서 운영될 리소스 그룹과 리소스들을 등록하는 순서가 남아 있습니다.  리소스 그룹과 리소스 등록에 대한 상세한 내용은 "MCCS 사용자 안내서의 4. 리소스 그룹 및 6 리소스

   "를 참조해 주십시오.

   After heartbeat configuration and license update, you will create a Cluster Group and add a resource in this at next step.

   For more details about this, Please refer to 'Chapter 4. Resource Group, Chapter 6. Resource' of 'MCCS User Guide' document.