/
5. Initial MCCS Configuration

5. Initial MCCS Configuration

2015/02/06

Initial configuration to access the web console

Initial web console access screen

  1. In the background, click on the MCCS link or open the web browser and access http://127.0.0.1:<UIPort>/main.

     


    [Figure] MCCS Shortcut Link

     

  2. When you access the link or URL, the following web screen will be displayed. The initial password is set to 'password'. 

    [Figure] MCCS Web Console Access View

     

     

     

  3. Press the [Login] button to start the initial heartbeat setting. 

Heartbeat Configuration

  1. Enter cluster name as your definition and click on "Server Connection" to bring information of host identities. 
    Next step is unable to proceed if the network is not connected. 
    If there was an existing heartbeat configuration, its information will be remained.


    [Figure] Initial Heartbeat Settings

  2. Enter hostname or IP address of the node. Or enter 127.0.0.1 when you connect to local node.
    MCCS will brings and shows hostname and network informations for the node.

     
    [Figure] Server Connection

  3. Edit node name as your definition and select IP address for heartbeat and mirror network.

    [Figure] Select IP address

     

     

  4. Click 'Test' to verify connectivities between two nodes.


    [Figure] Verifying connectivities between nodes

     



  5. Click 'Yes' button, when you confirm for heartbeat configuration.


    [Figure] Applying Heartbeat configuration

  6. Click 'OK' button to complete


    [Figure] Heartbeat configuration is completed  

 

Web Console Connection

When you first connect the MCCS console after configure heartbeat, you may need to update or enter an valid license key if you doesn't enter this during installation.

  1. Access the MCCS web console. Enter the password. Click on Access to access the console.

     
    [Figure] MCCS Web Console Access and Login Screen  

  2. Select Windows(W)->Preferences.

     
    [Figure] MCCS main web console 

  3. Click 'License Update' button for each node in the 'License Information'.

     
    [Figure] Preferences View 

  4. Enter a valid license key (temp. or perm.) for both nodes.

     
    [Figure] Entering an valid license key

    After heartbeat configuration and license update, you will create a Cluster Group and add a resource in this at next step.
    For more details about this, Please refer to 'Chapter 5. Resource Group, Chapter 7. Resource' of 'MCCS User Guide' document.