Versions Compared

Old Version 1

changes.mady.by.user Copy Page Tree

Saved on

compared with

New Version 2

changes.mady.by.user 정은진

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info


Info

You can change this Port number in the Heartbeat Setting menu and please, refer to 'Chapter 2.5. Modify HeartBeat Configuration' of MCCS user guide about this.

- ID : Account name to connect MCCS console. Default account is 'admin'.

- Password : Default value is 'password'.

Info

administrator Administrator : In this account, you can add, delete, modify the group and resource of MCCS, set the dependency or manually perform failover.
monitor Monitor : In this account, you can only check the status of group and resource


Info

You can change this in the Cluster Attributes View from Cluster Attributes tab and please, refer to '"Chapter 2. Management Web Console' of MCCS user guide " of MCCS Manual about this.



3. Press the [Login] button to start the initial heartbeat setting.

...

  1. Enter cluster name as your definition and click on "Server Connection" to bring informations of host identities.
    Next step is unable to proceed if the network is not connected. If there was an existing heartbeat configuration, its information will be remained.

    [Figure] Initial Heartbeat Settings


  2. Enter hostname or IP address of the node.
    MCCS will brings and shows hostname and network informations for the node.

    [Figure] Server Connection

  3. Edit node name as your definition and select IP address for heartbeat and mirror network.


    Click the "Test" button to verify connectivity between two nodes.

    Info

    Default node name is host name of the node. Node name for clustering doest not must be identical to it's host name.
    MCCS requires at least a heartbeat interconnection, 3 interconnections is recommended.


    Click 'Test' to verify connectivities between two nodes.

    [Figure] Verifying connectivities between nodes


    Warning

    Mirror network for data replication can be shared with one of primary heartbeat. Each pair of IP address of this between nodes must be on the same subnet.

    If these subnet are not matched between nodes, 'Test' button for verification will not be enabled.
    When you use mirror disk resource, you can configure three heartbeats.
    It is highly recommended to configure the heartbeats at least three when you use mirror disk resource.


  4. Click 'the "Yes' " button, when you confirm for heartbeat configuration.
     
    [Figure] Applying Heartbeat configuration

  5. Click 'the "OK' " button to complete.
     
    [Figure] Heartbeat configuration is completed 


...

  1. Access the MCCS web console. Default account is 'admin' and password is 'password'.Enter the password. Click on Access to access the console. 

  2. Select Windows(W)->Preferences.

  3. Click the 'License Update' button for each node in the 'License Information'.

    [Figure] Preferences View

  4. Enter a valid license key (temp. or perm.) for both nodes.

    [Figure] Entering an valid license key

...