Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


Table of Contents


Initial configuration to access the web console

Initial web console access screen

1. In the background, click on the MCCS link or open the web browser and access http://127.0.0.1:<UIPort>/main.

2. When you access the link or URL, the following web screen will be displayed. The initial password is set to 'password'.

[Figure] MCCS Web Console Access View 



You can change this Port number in the Heartbeat Setting menu and please, refer to 'Chapter 2.5. Modify HeartBeat Configuration' of MCCS user guide about this.

- ID : Account name to connect MCCS console. Default account is 'admin'.

- Password : Default value is 'password'.

administrator : In this account, you can add, delete, modify the group and resource of MCCS, set the dependency or manually perform failover.
monitor : In this account, you can only check the status of group and resource

You can change this in the Cluster Attributes View from Cluster Attributes tab and please, refer to 'Chapter 2. Management Web Console' of MCCS user guide about this.


3. Press the [Login] button to start the initial heartbeat setting.


[Figure] Edit heartbeat configuration



Heartbeat Configuration

  1. Enter cluster name as your definition and click on "Server Connection" to bring informations of host identities.
    Next step is unable to proceed if the network is not connected. If there was an existing heartbeat configuration, its information will be remained.

    [Figure] Initial Heartbeat Settings


  2. Enter hostname or IP address of the node.
    MCCS will brings and shows hostname and network informations for the node.

    [Figure] Server Connection

  3. Edit node name as your definition and select IP address for heartbeat and mirror network.

    Default node name is host name of the node. Node name for clustering doest not must be identical to it's host name.
    MCCS requires at least a heartbeat interconnection, 3 interconnections is recommended.



  4. Click 'Test' to verify connectivities between two nodes.

    [Figure] Verifying connectivities between nodes


    Mirror network for data replication can be shared with one of primary heartbeat. Each pair of IP address of this between nodes must be on the same subnet.

    If these subnet are not matched between nodes, 'Test' button for verification will not be enabled.
    When you use mirror disk resource, you can configure three heartbeats.
    It is highly recommended to configure the heartbeats at least three when you use mirror disk resource.


  5. Click 'Yes' button, when you confirm for heartbeat configuration.
     
    [Figure] Applying Heartbeat configuration

  6. Click 'OK' button to complete.
     
    [Figure] Heartbeat configuration is completed 


Web Console Connection

When you first connect the MCCS console after configure heartbeat, you may need to update or enter an valid license key if you doesn't enter this during installation.

  1. Access the MCCS web console. Default account is 'admin' and password is 'password'.Enter the password. Click on Access to access the console. 

  2. Select Windows(W)->Preferences.

  3. Click 'License Update' button for each node in the 'License Information'.

    [Figure] Preferences View

  4. Enter a valid license key (temp. or perm.) for both nodes.

    [Figure] Entering an valid license key

※ License Expire : Temporary license of MCCS is 90 days. If Temporary license is expires, you must be issued new temporary or permanent license. 
If there is no license file or license expires after 15 days, MCCS works restrict mode. So faults are occured MCCS does not failover.

After heartbeat configuration and license update, you will create a Cluster Group and add a resource in this at next step. 
For more details about this, Please refer to 'Chapter 5. Resource Group, Chapter 7. Resource' of 'MCCS User Guide' document.



  • No labels