| | | | | |
|---|
1 | err | breakpoint: msg(%s)
| | | bsr/bsr-kernel-compat/windows/bsr_windows.c:522
|
2 | info | Reference count did not increase because no kobj were assigned.
| 대상 객체가 할당되어 있지 않아 참조 카운트 감소를 실패했습니다. | | bsr/bsr-kernel-compat/windows/bsr_windows.c:1555
|
3 | err | error=0x%x
| | | bsr/bsr-kernel-compat/windows/bsr_windows.c:1595
|
4 | err | could not create event, status : 0x%x
| | | bsr/bsr-kernel-compat/windows/bsr_windows.c:2353
|
5 | info | Dump changed to hexadecimal. addr(0x%p), size(%d). width(%d)
| 덤프를 hex로 변환합니다. | | bsr/bsr-kernel-compat/windows/bsr_windows.c:2874
|
6 | info | %s
| 덤프를 hex로 출력합니다. | | bsr/bsr-kernel-compat/windows/bsr_windows.c:2900
|
7 | err | could not open mount manager, status : 0x%x
| | | bsr/bsr-kernel-compat/windows/bsr_windows.c:2347
|
8 | err | mvolGetDiskPerf status=0x%x
| | | bsr/bsr-kernel-compat/windows/bsr_windows.c:3131
|
10 | info | update bitmap uuid %llX pnode-id(%d)
| | | bsr/bsr_main.c:7342
|
11 | err | failed to create debugfs entries
| debugfs에 리소스 추가를 실패했습니다. | | bsr/bsr_debugfs.c:1731
|
12 | err | failed to create debugfs entries
| debugfs에 연결 추가를 실패했습니다. | | bsr/bsr_debugfs.c:1828
|
13 | err | failed to create debugfs entries
| debugfs에 장치 추가를 실패했습니다. | | bsr/bsr_debugfs.c:1934
|
14 | err | failed to create debugfs entries
| debugfs에 피어 장치 추가를 실패했습니다. | | bsr/bsr_debugfs.c:2046
|
15 | crit | warning: failure
| 로직 버그 발생 시 windows에서만 출력 되는 로그입니다. | | bsr/bsr_int.h:455
|
16 | crit | BUG: failure [ %s ]
| 로직 버그 발생 시 버그로 의심되는 조건을 출력하는 로그로 windows에서만 출력 되는 로그입니다. | | bsr/bsr_int.h:460
|
18 | err | ASSERTION %s FAILED in %s
| D_ASSERT() 오류가 발생했습니다. | 로그에 출력 확인이 필요합니다. | bsr/bsr_int.h:605
|
19 | err | ASSERTION %s FAILED in %s
| expect() 오류가 발생했습니다. | 로그에 출력 확인이 필요합니다. | bsr/bsr_int.h:620
|
20 | info | %s, The timestamp to compare is uncertain. begin(%lld), end(%lld)
| 비교할 타임 스탬프가 불확실합니다. | | bsr/bsr_int.h:4669
|
26 | info | bsr_send_peer_dagtag lost_peer:%p lost_peer->last_dagtag_sector:%llx lost_peer->peer_node_id:%d
| | | bsr/bsr_main.c:2374
|
27 | info | Node %d (%s) synced up to node %d (%s). copying bitmap slot %d to %d.
| | | bsr/bsr_main.c:7482
|
28 | err | unexpected
| | | bsr/bsr_main.c:7573
|
29 | err | In UUIDs from node %d found equal UUID (%llX) for nodes %d %d
| | | bsr/bsr_main.c:7574
|
30 | err | I have %llX for node_id=%d
| | | bsr/bsr_main.c:7576
|
31 | err | I have %llX for node_id=%d
| | | bsr/bsr_main.c:7578
|
32 | info | Peer synced up with node %d, copying bitmap
| | | bsr/bsr_receiver.c:5191
|
33 | info | synced up with node %d in the mean time
| | | bsr/bsr_receiver.c:5202
|
34 | err | crypto_shash_setkey() failed with %d
| | | bsr/bsr_receiver.c:10508
|
35 | err | expected AuthChallenge packet, received: %s (0x%04x)
| | | bsr/bsr_receiver.c:10533
|
36 | err | unexpected AuthChallenge payload.
| | | bsr/bsr_receiver.c:10540
|
38 | err | Peer presented the same challenge!
| | | bsr/bsr_receiver.c:10559
|
39 | err | crypto_shash_digest() failed with %d
| | | bsr/bsr_receiver.c:10579
|
40 | err | expected AuthResponse packet, received: %s (0x%04x)
| | | bsr/bsr_receiver.c:10595
|
41 | err | expected AuthResponse payload of %u bytes, received %u
| | | bsr/bsr_receiver.c:10602
|
43 | err | crypto_shash_digest() failed with %d
| | | bsr/bsr_receiver.c:10629
|
44 | info | Peer authenticated using %d bytes HMAC
| | | bsr/bsr_receiver.c:10637
|
45 | info | Node %d synced up to node %d.
| | | bsr/bsr_main.c:7684
|
53 | err | ObReferenceObjectByHandle Failed. status(0x%x)
| | | bsr-platform/windows/bsrvflt/util.c:159
|
54 | info | %u: : %llu
| | | bsr/bsr_nl.c:2392
|
56 | err | ASSERT FAILED
| | | bsr/kref_debug.c:68
|
57 | err | object of class: %s
| | | bsr/kref_debug.c:69
|
58 | err | [%d] = %d (%s)
| | | bsr/kref_debug.c:73
|
59 | err | `` | | | bsr/kref_debug.c:76
|
60 | err | Increase KREF_DEBUG_HOLDER_MAX
| | | bsr/kref_debug.c:88
|
61 | err | Increase KREF_DEBUG_HOLDER_MAX
| | | bsr/kref_debug.c:102
|
62 | info | Wait a limited time for the operator queue to flush.
| 작업 대기열 flush 완료를 대기합니다. | | bsr/bsr_main.c:4331
|
63 | info | The work queue is not flushed because it is not working.. resource(%p)
| 작업 대기열이 작동하지 않기 때문에 flush를 하지 않습니다. | | bsr/bsr_main.c:4343
|
64 |