12- Modify HeartBeat Configuration

Owned by Copy Page Tree
2018/07/18
2 min read

Depending on the user's intentions, heartbeat of the node can be changed.
Below is the instruction of how to change heartbeat.

Table of Contents

How to edit heartbeat

  1. After selecting a cluster in the console, go to the 'Menu' and select 'Edit' - 'Edit HB Config'.

    [Figure] Edit Heartbeat Configuration View

  2. It shows heartbeat configuration setting.

    [Figure] Heartbeat Configuration Edit Initial View

  3. Edit heartbeat and check connection state by clicking the "Test" button. 

    [Figure] Test Connection State after changing heartbeat

  4. Click the "Yes" button to apply heartbeat changes. 

    [Figure] Check heartbeat changes View

  5. When the engine is restarted, a message will appear.

    [Figure] Exit Console View



CLI Use(mchb command)

mchb command

Send the heartbeat related command.
You can issue the following commands: heartbeat configuration listing, heartbeat configuration, heartbeat modification, cluster name modification, and heartbeat port modification.

When you install MCCS, the initial user account ID is set to 'admin' and the password is set to 'password'.
When you run the CLI command, you need to enter the ID and the password. Otherwise, the above initial ID and password will be used.
Thus, when you change the initial user password, you must enter the ID/password in the CLI command as options.


Syntax


mchb [-u userid] [-pw password] -options [-c newClustername ] [ -hbport port ] [ -node nodeName]


Options

OptionDescription

-h

Display Help.

-uDesignate the user ID.
-pw

Create the user password with the -u option.

-show

It shows the currently configured heartbeat information.

-clustermodify

Enter the new cluster name to switch.

-hbport

Enter the new heartbeat port to switch.

-hbmodify

Change the heartbeat configuration.

-newconfigUsed when you configure the heartbeat for the first time.


Example

show

You can see the heartbeat information configured.


mchb -u admin -pw password -show

clustermodify

The testCluster cluster name is changed to newCluster.


mchb -u admin -pw password -clustermodify -u admin -pw password -c newCluster

hbport

Change the heartbeat port to 12345.


mchb -u userid -pw password -hbport 12345

hbmodify

In the heartbeat lines, the Primary1 heartbeat is changed to 200.200.200.1 and 200.200.200.2.


mchb -u userid -pw password -hbmodify -node Active 200.200.200.1,100.100.100.1,10.10.7.71 -node -StandBy 200.200.200.2,100.100.100.2,10.10.7.72

newcofig

Configure the heartbeat.
Cluster name: MCCS_Cluster
Heartbeat port: 14321 , network address of other node: 10.10.7.72
Node name: Active , StandBy


mchb -u admin -pw password -newcofig -clustername MCCS_Cluster -hbport 14321 -remote 10.10.7.72 -node Active 100.100.100.1,200.200.200.1,10.10.7.71 -node StandBy 100.100.100.2,200.200.200.2,10.10.7.72