Page Comparison

Table of Contents

...

type	property	default value	description
normal	lang	english	DRX language settings file Located in "base-dir/lang" of the configuration. ex) korean.ini
	base-dir	DRX install path	Default path where DRX is installed
	bsr-conf-path	Windows: ../etc/bsr.conf Linux: /etc/bsr.conf	Specify the path to bsr.conf
	fsr-conf-path	Windows: ../etc/bsr.conf Linux: /etc/bsr.conf	Specify the path to fsr.conf
	connect-timeout	10	Timeout value in seconds after connecting to a remote DRX, while sending and receiving initialization packets
	bwlimit	0 (unlimited)	Bandwidth limit on sending (incoming bandwidth controlled by bwlimit value on remote DRX)
	ip-verification	on	on: Allow only the IP connections set in dbd.conf. off: Allow connections for all IPs.
	ulimit-open-files-count	0	Applies to Linux only and sets the number of files the process can open. Values : -1 (10240), 0 (same as system setting), Specify yourself (1-65536)
	ipc-port	9100	Specify internal ipc port values for the CLI to control the drx (supported in version 1.3.1 and later).
log	loglevel-file	info	Specify the log level that is written as a file Location: stored in the logs folder of the installation path
	loglevel-console	info	Specify the log level that is output to the screen in foreground mode
	logfile-max-size	10M	File size limit per log file
	logfile-max-count	10	Maximum number of log files kept by type
	performance-log	off	Whether to save performance statistics log
compress/encrypt	block-size	63K	Block size to be used for compression/encryption Note: The size of the transfer buffer for compression/encryption is set to twice the block-size value and is set to 1MB maximum.
	min-raw-block-size	1K	Minimal packet size to send as plain text even when compression/encryption is set.
	process-thread-count	-1 (auto)	Number of threads to use when processing multi-thread packets. ※ It is intended for tuning and debugging, so it is not recommended to make any changes.

...

drx.conf sample

drx.conf

# BSR Proxy configuration
#
[global]
# language settings file
# lang=korean

# Default path where DRX is installed
# base-dir=/opt/DRX

# Specify the path to bsr.conf
# bsr-conf-path=c:\program files\DRX\bsr.conf

# Bandwidth limit on sending
# bwlimit=100M

# Block size to be used for compression/encryption
# block-size=100K

# Minimal packet size to send as plain text
# min-raw-block-size=256K

# Timeout value
# connect-timeout=10

# Confirmation of binding IP that listens for connection
# ip-verification=off

# log levels: off < trace < debug < info < warning < error < critical
# Specify the log level that is output to the screen in foreground mode
# loglevel-console=info

# Specify the log level that is written as a file
# loglevel-file=info

# File size limit per log file
# logfile-max-size=10M

# Maximum number of log files kept by type
# logfile-max-count=10

# Whether to save performance statistics log
# performance-log=off

# multi-threaded packet processing. default is auto(-1), disable to 0
# process-thread-count=8

...

Versions Compared

Old Version 17

New Version 18

Key