Page Comparison

Table of Contents

DRX 는 운영머신에 DRBD 가 이미 설치된 경우 DRX 패키지만 추가로 설치하면 됩니다. DRX 전용서버로 별도 구성할 경우에는 DRX 패키지와 더불어 DRBD 연동을 위한 drbd-utils 유틸리티를 부가적으로 설치해야 하며 HW 압축을 구성할 경우 Intel QAT 라이브러리에 대한 설치가 요구됩니다.

...

If the DRX is already installed on the operating machine, you only need to install additional DRX packages. In case of separate configuration with DRX dedicated server, DRB package and drbd-utils utility for DRBD interworking should be installed additionally. If HW compression is configured, installation of Intel QAT library is required.

platform	Local configuration	Dedicated server configuration	Remarks
Linux	Install Linux DRBD(http://www.drbd.org) 설치 Install DRX 설치: reference to 3.1 Install on Linux 설치 참고	Install drbd-utils(8.9.x) 설치 HW 압축 라이브러리 설치 & 빌드 QAT 라이브러리 빌드 DRX 설치: 3.1 Linux 설치 참고compression library installation & build Build the QAT library Install DRX: reference to 3.1 Install on Linux	drbd-utils 버전version: 8.9.x
Windows	Install Windows DRBD 설치 Install DRX 설치: reference to 3.2 Install on Windows 설치 참고	Install DRX 설치: 3 reference to 3.2 Install on Windows 설치 참고 Install drbd-uitls(wdrbd-drbd-utils-x64-1_5_2) 설치 DRX 설치경로 Copy directly to the DRX installation path (c:\Program Files\drx\bin)로 직접 복사

3.1. Install on Linux

...

The installation supports shell script installation and GUI based installation and can be installed manually. The default installation location is the "/opt/DRX" 경로이며 해당 경로에 DRX 라이선스 파일이 위치해야 합니다. 라이선스 구성에 대한 내용은 path and the DRX license file must be located in that path. For information about licensing, please refer to 3.4. 라이선스의 내용을 참고하십시요license.

3.1.1.

...

Install linux DRX service by shell script

The following is the process of installing with Shell Script.

Code Block
[root@node1 opt]# sh DRX_Centos-x64_1_1-A7.sh -c Unpacking JRE ... Preparing JRE ... Starting Installer ... Please select a language: 1: English [Enter] 2: Korean [1 - 2]

3.1.2.

...

Install the linux DRX Service by GUI

DRX 설치파일을 실행하여 GUI 방식 설치를 합니다. 설치 후 새로운 명령창을 열어서 DRX 구축과정을 진행합니다Run DRX installation file to perform GUI-based installation. After installation, open a new command window and proceed with the DRX installation process.

3.1.3.

...

Linux DRX service auto-start setting

The DRX service is set up as a daemon service and automatically restarts the DRX service when you restart the system, but sometimes you need to configure the service not to start automatically. Automatic startup for services can be configured via systemctl or chkconfig.

3.2. Install on Windows

...

3.2.1.

...

Install the Windows DRX Service

When installed using the installer, the DRX service is registered with the Windows service to start automatically at system startup.

3.2.2.

...

Manually installing the Windows DRX service

You can build your DRX service directly using the umount command.

drxsvc /i: Drx 서비스 설치install DRX service
drxsvc /u: Drx 서비스 제거remove DRX service

3.3.

...

Uninstall

Delete it with the uninstall command provided in the installation path. Even if you delete DRX, your previous logs, configuration files, and license files are retained for management.

3.4.

...

DRX를 운영하려면 라이선스 파일이 필요합니다.

...

License

A license file is required to operate DRX.

file name: "drx.lic"
DRX를 설치한 경로에 라이선스 파일을 복사해야 합니다.

...

You must copy the license file to the path where you installed DRX.

For license inquiries, please contact Mantech.

Versions Compared

Old Version 2

New Version 3

Key